Gamma di prodotti
Contattateci
Add：Edificio 1, Distretto Nord, Zhongke Innovation Industrial Park, Zona Economica, Città di Weihai
50 Axis 8-4096 Circle Mechanical Multi Circle
This product uses permanent magnets and magnetic induction elements. After magnetoelectric conversion, the angular displacement of the shaft is converted into an electrical pulse signal for output. It can be widely used in various automatic control and measurement fields, such as machinery manufacturing, shipbuilding, textile, printing, aviation, military industry, testing machines, elevators, etc.
Classificazione:
Parole chiave:
Dettagli del prodotto
▋ ADK-economical absolute encoder
● Product description
Model：ADK-A50L8-A4096G4RCN
This product uses permanent magnets and magnetic induction elements. After magnetoelectric conversion, the angular displacement of the shaft is converted into an electrical pulse signal for output. It can be widely used in various automatic control and measurement fields, such as machinery manufacturing, shipbuilding, textile, printing, aviation, military industry, testing machines, elevators, etc.
This product has the characteristics of anti-vibration, corrosion resistance, pollution resistance, small size, low cost, high reliability, simple structure, etc. The internal use of ASIC devices, high reliability, long life, strong anti-interference performance, technical level is the domestic priority.
Model description: tighten the screw hole installation, the main body size is φ50mm, the axis is φ8, the cable is side-out, the resolution is 4096, the gray code negative logic is output in parallel, and the working voltage is DC8-29V.
● Waveform
Note: The absolute parallel output encoder divides the circumference into corresponding equal intervals evenly according to the required accuracy, and each interval is represented by a code combination with a fixed signal of several bits, so that the encoder can still remember the absolute operation of the encoder after the power is turned off. position. If 1024 lines are required, a combination of ten signal lines is required, namely:
0: Gray code is 00000000000
1024: Gray code is 11000000000 (the above is positive logic, negative logic is the opposite)
▋ Technical Parameters
● Wiring table
| Lead color | Output signal (NPN collector output) |
| Red | Vcc |
| Black | GND |
| Shielded wire | Shielded wire |
| White | D0 |
| Gray | D1 |
| Yellow | D2 |
| Brown | D3 |
| Pink | D4 |
| Purple | D5 |
| Orange | D6 |
| Blue | D7 |
| Green | D8 |
| Light blue | D9 |
| Light green | D10 |
| Dark green | D11 |
☉ Note: The definition of encoder wiring is subject to the label on the housing
● Environmental parameters
| Operating temperature | -40～85℃ |
| Working humidity | 98% Max |
| Protection level | IP54 |
| Anti-magnetic interference | Common mode magnetic field suppression |
● Electrical parameters
| Resolution | 4096 |
| Operating Voltage | DC 8~29V |
| Working current | 500mA max |
| Output form | NPN open collector |
| Response frequency | 2MHz |
| Output current | 25mA Max |
● Mechanical parameters
| Starting torque (N·M) | 1.5x 10^(-3) |
| Moment of inertia (Kg·m²) | 9.0x 10^(-8) |
| Max shaft load | 200N (axial)/100N (radial) |
| Max speed r/min | 3000 |
▋ Electrical parameters and output description
● Long line drive output
● Voltage output
● Open collector output
● Level logic
The encoder output logic includes two types: positive logic and negative logic:
☉ If the opposite logic is required, the signal can be inverted and counted by software or hardware at the receiving end, and the logic output form can also be specified when ordering.
● Output example
▋ Precautions
○ An elastic soft connection is adopted between the encoder shaft and the output shaft of the user end to avoid damage to the shaft system of the encoder due to the string movement and beating of the user shaft.
○ Please pay attention to the allowable shaft load when installing.
○ It should be ensured that the difference between the encoder shaft and the user's output shaft is less than 0.20mm, and the deflection angle to the axis is less than 1.5°.
○ Try to avoid knocks and hits during installation
○ Do not connect the power cord to the ground wire reversely.
○ The grounding wire should be as thick as possible, generally greater than φ3.
○ Do not overlap the output wires of the encoder to avoid damage to the output circuit.
○ Do not connect the signal wire of the encoder to a DC power supply or AC current to avoid damage to the output circuit.
○ The motor and other equipment connected to the encoder should be well grounded and free of static electricity.
○ Use shielded cables when wiring.
○ Before starting up, you should carefully check whether the product manual matches the encoder model and whether the wiring is correct.
○ For long-distance transmission, signal attenuation factors should be considered, and an output mode with low output impedance and strong anti-interference ability should be selected.
○ Avoid using in strong electromagnetic wave environment.
▋ Warranty conditions
Under the condition that the user abides by the component storage and use rules, within 12 months from the date of leaving the factory, the company will repair or replace it free of charge due to product quality problems. The specifications in catalogs, manuals or technical data are subject to change without notice.
● Mechanical Dimensions
Profilo aziendale
Weihai idencoder electronic technology co.,ltd.
Idencoder è un'impresa tecnica situata nella città di Weihai, nella provincia di ShanDong, in Cina, che fornisce soluzioni di codifica professionali a centinaia di imprese in tutto il mondo.
Con il nome di Weihai Idencoder Electronic Technology Co., Ltd, ci siamo specializzati nello sviluppo, nella produzione e nella commercializzazione di encoder industriali. I nostri prodotti principali: A. Encoder incrementale; B. Encoder incrementale programmabile; C. Encoder assoluto monogiro e multigiro con interfaccia parallela, SSI, Modbus, Profibus, Canopen e Profinet; D. Encoder a filo; E. Generatore manuale di impulsi
I nostri servizi
Risolvere i problemi per i clienti, per la scorta di marketing
Servizio prevendita
In base alle esigenze effettive dei clienti per determinare il modello e le specifiche dell'apparecchiatura, ma anche in conformità con i requisiti speciali dei clienti progettazione personalizzata, e per fornire ai clienti un programma perfetto, davvero fornire ai clienti un prodotto soddisfacente e ragionevole. Possiamo anche formare i nostri clienti sulla guida tecnica pertinente, in modo che possano padroneggiare alcune conoscenze tecniche generali e abilità di manutenzione delle attrezzature.
Monitoraggio delle vendite
Durante il processo di vendita, seguiamo sempre il processo di produzione e consegna degli ordini dei nostri clienti e cerchiamo di abbreviare il ciclo di produzione e consegna salvaguardando la qualità dei nostri prodotti.
Servizio post vendita
In risposta alle difficoltà dei clienti, disponiamo di personale dedicato all'assistenza post-vendita che lavora uno a uno per risolvere i problemi incontrati dai clienti fino al raggiungimento del successo, e che si occupa di fornire ai clienti le tecniche corrette per l'utilizzo del prodotto, in modo da garantire che sia durevole e duraturo nelle loro mani.
Messaggio del prodotto
Altri prodotti
È un'impresa nazionale ad alta tecnologia specializzata in R&S, produzione e vendita di encoder rotativi industriali.
Add：Edificio 1, Distretto Nord, Zhongke Innovation Industrial Park, Zona Economica, Città di Weihai